Lab Solutions

Lab Solutions

sysmocom's lab solutions provide easy to use and easy to set up starter kits which permits users to concentrate on research and development and not in setting up the network.

The open source code and the well documented interfaces still enable fine tuning of the set up and place (software) probes at may points in the chain. The IoT² 608 offers in addition the capabilities for cabled devices and combining of multiple networks.

Do you have additional needs for your lab systems? Challenge us, we are able to adapt our technologies fast and flexible to your needs.

    sysmoSIMBANK

    The sysmoSIMBANK is a 96 or 192 slot rack-mount network smart card reader

    16-channel GPS antenna splitter

    16-channel GPS antenna RF signal splitter divider

    Osmocom icE1usb

    The Osmocom icE1usb is an open source hardware USB-attached dual-port E1 interface

    sysmoOCTSIM

    The sysmoOCTSIM is an eight-slot smart card reader printed circuit board assembly (PCBA) with USB-CCID interface.

    sysmo NITB 2G starter kit

    The sysmo NITB 2G starter kit limited edition is the perfect starting point for the 2G world. The NITB, a sysmoBTS 1002 and SIM cards provide everything to just plug and play a 2G network.

    sysmoQMOD

    The sysmoQMOD hosts up to four mPCIE WWAN Modules with remote management and remote SIM capabilities. Modems and management are controlled via USB.

    sysmo NITB 3.5G starter kit limited edition

    The sysmo NITB 3.5G starter kit limited edition is the perfect starting point for the 3G world. The NITB, a 3.5G femtocell and SIM cards provide everything to just plug and play a 3G network.

    IoT² 608

    The IoT² 608 is a multistandard mobile network simulator for lab testing of M2M solutions. It can simulate two mobile operators at the same time in three different generations from 2G to 4G.

    sysmocom RF cavity filter

    sysmocom cavity filters are cost-effective cavity filtrs for a variety of RF use cases

    M.2 WWAN modem breakout board

    The sysmocom M.2 WWAN breakout board is a useful utility for evaluating any kind of M.2 cellular modems.

    miniPCIe WWAN modem breakout board

    The sysmocom miniPCIe WWAN breakout board is a useful utility for evaluating any kind of miniPCIe cellular modems.

    SIMtrace2 - Debugging, tracing and emulating SIM card communication

    The sysmocom SIMtrace allows to debug and tracing SIM/USIM/ISIM card APDUs. The device is placed between a mobile phone and the SIM/USIM/ISIM card. This allows to capture the communication between the two entities.

    sysmocom SIM / USIM / ISIM cards

    The sysmoISIM-SJA2 is a standards-compliant GSM SIM + USIM + ISIM card (2FF, 3FF, 4FF). It is intended to be used in sysmoNITB based networks.